Hi All, New Guy here. Need recomendation on which Anderson product would be best used for a 2" flex/pvc coupl glue joint leak on pressure side. Leak is a dampness static/ drip per second or two w/pump on high. Thanks for your response.......... BOB

try the h20 glue

pull it apart glue it properly, after cleaning thoroughly.

Man, we tried teh h20 glue today on a jet & 3/4 flex hose connection. Couldnt stop the leak w/ the line wet. We decided to drain the tub below the line, apply the glue, let it setup a bit till quite tacky and then let it set for another hour. We didnt wait around for the net hour, but we're heading back to check it out tomorrow.

-Jeremy
Florida Leisure Pool & Spa
www.FLLeisure.com